How to maintain the ceiling machine

//How to maintain the ceiling machine

Core Tip: Pay attention to power transmission and control line maintenance. This is mainly to avoid the situation that the line is pulled or crushed due to manual negligence. There is also a mechanical upper plate machine, a lower plate machine and other components that need to work reciprocally, and may have a certain impact on the line. This requires checking the integrity of the line and the tightness of each interface, which is relatively simple.

1.Note that the transmission line maintenance and control. This is mainly to avoid the situation that the line is pulled or crushed due to manual negligence. There is a mechanical trigger, the lower plate member need reciprocating machine work, the line may also have some influence. This need to check the integrity of the line as well as the closeness of each interface, relatively simple.

2.Wear of each sliding part. There will definitely be some friction during the use of the machine, especially the upper plate machine of the fully automatic pvc gypsum ceiling production line, as well as the lower plate machine, the code board machine and the palletizer. Regular inspection of the opposite sex rails, guide rails, and sliders is required. If the wear is serious, it needs to be replaced in time. These parts do not require extensive disassembly of the machine and are easy to replace.

3.The fastening of the motor and other parts. These parts are generally fixed by screws, and it is easier to overhaul.

4.Pay attention to the tightness of the transmission components such as the chain, and make appropriate adjustment according to the production situation.

5.Wipe each probe to ensure that the probe is not covered by dust, resulting in inaccurate positioning. At the same time, pay attention to the wear of the saw blade, and replace the saw blade of the gypsum board saw in time.

By | 2019-05-09T16:37:27+00:00 October 26th, 2018|News|